Brother HL-B2080DW is a duplex wireless monochrome laser printer. With automatic duplex printing, you can print 36 papers per minute and print a high-quality document at a very low price. The machine’s print resolution is 1200 x 1200 dpi (color) and 600 x 600 dpi (black). With outstanding connectivity, you can connect the printer via USB, LAN, and WLAN easily. On this page, we have given the Brother HL-B2080DW printer unboxing and setup. Follow the instructions carefully and set up your Brother printer properly.
Unboxing Brother HL-B2080DW:
Keep the printer box on a flat surface and then check if the box is completely sealed.
Open the box and take all the components from the box.
The Brother HL-B2080DW printer
Brother Installation Disc
Quick Setup Guide
Product Safety Guide
Remove all the protective tapes from all the sides of the printer.
Open the front cover and take the protective material from the printer.
Pull the paper tray completely out of the printer.
Remove the protective tape from the paper tray and then insert the paper tray into the printer.
Steps to load toner:
Don’t connect the power cord to the printer.
Unpack the drum unit from the package.
Shake the toner cartridge several times before inserting it into the drum unit.
Unpack the toner cartridge from the package.
Insert the toner cartridge on the drum unit until it snaps.
Clean the corona wire inside the drum unit several times.
Now, insert the drum unit and the toner cartridge assembly into the printer until it stops.
Now, close the front cover.
Steps to load a paper stack into the paper tray:
First, pull the paper tray completely out of the printer.
Press the green lock lever to slide the paper guides towards the edges.
Load a paper stack on the paper tray and make the print side face down.
Load the paper below the maximum paper mark.
Adjust the paper guides to touch the edges of the paper stack.
Finally, insert the paper tray into the printer until it stops.
Connect the power cord to the printer and then connect the other end to an electrical outlet.
Press the Power button on top of the printer.
When the printer is turned ON, use the arrow keys to select your language from the list.
Now, set the date and time.
Steps to install printer driver:
To install your Brother printer driver on your computer, make sure the printer and the computer are connected to the same network.
Insert the Brother Installation Disc into the computer.
Double-click on the CD-ROM icon.
Locate and double-click the setup file.
Run the printer driver on the computer.
Select the connection method. It could be wired or wireless.
Once the printer driver is installed, print a test print and then check the print quality.
If your computer does not support a CD drive, you can download and install the printer driver from the Brother official website.