Epson wf 6530 printer

 Epson wf 6530 printer

Epson wf 6530 printer


Epson WorkForce WF-6530 is a multifunctional printer that can print, scan, copy, and fax. This printer is known for laser-sharp texts and high-quality prints. If you wish to know how to set up your Epson WF-6530 Printer, continue to read the following sections.


Unpack the product box and take out everything you received. Your package includes the Epson WF-6530 printer, ink cartridges, installation disk, power cord, and a user manual. Remove all the protective tapes from the printer and its components. Also, verify that you have received all the components without any damage.

Turn on your printer

Take out the power cord given along with your printer. Connect the power cord to the rear port of your printer and an electrical outlet. Turn on your printer by pressing the Power button.

Install the ink cartridges

  • Open the printer’s front door and unpack the cartridges.
  • Install the cartridges one by one into their holders.
  • Make sure to install them according to the color indications.
  • Once you have installed all the ink cartridges, close the printer’s front door.

Load paper

  • Extend the paper tray from the printer and slide the paper guides to the extreme ends.
  • Take a stack of paper and load the sheets into the paper tray.
  • Adjust the guides against the paper; make sure not to tighten them too much.
  • Finally, insert the paper tray into the printer.

Connect the telephone line

If you are going to use your printer for sending a fax, take out the phone cord and connect it to the LINE port of your printer and a wall jack. Configure your date, time, and station ID and complete the fax setup.

Software installation

  • Take out the supplied CD and insert it into your computer’s CD drive.
  • Now, double-click the setup file and install it on your computer by following the on-screen instructions.
  • If your computer doesn’t have a CD drive, visit the official page of Epson and download the appropriate printer driver recommended for your OS.
  • Then, install the printer software on your PC by following the on-screen instructions.
  • Connect your printer and your computer to the same network and start printing using the printer driver. 

In this manner, you can complete the setup of your Epson WF-6530 Printer. If you have any other queries, you can get back to us.