How To Set up Epson Workforce WF 3640

How To Set up Epson Workforce WF 3640

How To Set up Epson Workforce WF 3640

Epson Workforce WF 3640 is an impressive multifunction printer. It is compact and easy to carry. It supports Wireless and Direct Wi-Fi connections and has a built-in battery. So you can easily print from anywhere anytime.

Unboxing Epson Workforce WF 3640

  • Open the Epson Workforce WF 3640 printer box, take the device out, and keep it in the place you have selected. Use a flat surface to place your printer.
  • The package has black, cyan, magenta, and yellow ink cartridges, a USB cable, power cord, manual, and a software CD. Keep the printer aside.
  • Remove all the tapes in and around the printer.
  • Take one end of the power cable, insert it into the printer's rear port, and insert the plug-end into the wall's electrical outlet.
  • Press the Power button of the printer to turn it on.
  • After the printer is stable, go to Menu on the printer control panel and change the date, time, country, and region accordingly.
  • Place a clean stack of plain paper into the input tray 1 or 2 of the printer.
  • Open the scanner lid of the printer and lift it.
  • The printer's carriage moves from left to the center and then to the left.
  • Take the ink cartridges out and remove the yellow sticker or tape from each ink cartridge. Insert them one by one into the respective slots.
  • Close the scanner lid. Within a few seconds, your Epson printer ejects an alignment page confirming the successful installation of the ink cartridges.
  • The basic Epson WorkForce WF 3640 setup is now complete.

Epson Workforce WF 3640 wireless setup

  • Press the Wi-Fi Setup option on the printer control panel.
  • Press Wi-Fi Setup Wizard->Wireless Network Name and Password, and then choose to Proceed.
  • After the network settings are displayed on the printer control panel, press OK to save them.
  • Install the printer software, select the connection type as Wireless, and then proceed with the instructions to complete the printer setup.

Epson Workforce WF 3640 Driver Install

  • Driver installation can be done in two ways, either by website downloads or via CD drive.
  • Go to the Epson official website and enter your printer model and click Download.
  • The downloaded driver file will create a disk sort of image on your computer desktop. Now, double-click on the installer icon to start the installation process.
  • Follow the on-screen prompts and finish the printer setup process.
  • Or, you can use the installation CD on your computer to select the Epson WorkForce WF 3640 setup file and open it by extracting the contents.
  • Choose Run or Save as you wish, follow the on-screen instructions, and complete the driver installation process.

You have now successfully finished the Epson WorkForce WF 3640 Setup.