Hp Envy 4512 Printer Setup

Hp Envy 4512 Printer Setup

Hp Envy 4512 Printer Setup

HP Envy 4512 is an all-in-one monochrome inkjet printer. The easy-to-setup and user-friendly interface attract more people and make them purchase this printer. But, its ink cartridges are small and expensive. The simple and quick instructions given below explain how to perform the HP Envy 4512 printer setup for the first time.

  • To set up a printer, first, you have to make sure that it is unpacked and ready for setup. So, as the first step of the HP Envy 4512 printer setup, check whether it is unpacked. If not, unpack the printer completely.
  • After unpacking the printer, place it closer to an electrical outlet.
  • Now, connect your unpacked printer to the outlet and turn it on.
  • Once your printer becomes stable, you will be asked to choose the device language.
  • From the list of suggestions, select the language as per your preferences and press the Yes button.
  • Similarly, configure the other settings of your printer by following the instructions displayed on the screen.
  • After configuring the settings, make sure to press the Yes button.
  • Now, open the input tray.
  • Fan and load a stack of paper that you wish to use for printing into the input tray.
  • After loading the paper, adjust the width guides properly.
  • Open the output tray of your printer.
  • Raise the scanner unit of your printer.
  • Open the ink cartridge covers.
  • Unpack the cartridges.
  • Install the unpacked color cartridge on the left-hand side of the slot.
  • Similarly, install the unpacked black cartridge on the right.
  • Close the covers and lower the scanner unit of your printer.
  • Now, your printer will automatically start to print an alignment page. In case the printer fails to print the page, open the Setup screen of your printer by tapping the Setup icon.
  • Select Tools > Align Print.
  • Now, your printer will start to print the alignment page.
  • Once the page is successfully printed, scan it to complete the alignment process.
  • After aligning the ink cartridges, press the OK button.
  • Finally, install the printer driver on your Windows or Mac computer to finish the setup.
  • You can use either the setup CD-ROM or the downloaded printer driver file to perform the software installation.
  • After installing the software, print a test page to check whether the HP Envy 4512 printer setup is done correctly.

To get remote assistance in performing your HP Envy 4512 Printer Setup, contact us.