PAGEWIDE PRO 452DW

HP envy4520-printer

HP PageWide Pro 452DW Inkjet Printer

The HP PageWide Pro 452DW printer is one of the most economical machines in the line of PageWide Pro printers. The printer has a duty cycle of 50,000 pages and offers wired and wireless modes of connectivity. The printer’s built-in Wi-Fi supports WPS along with Wi-Fi Direct (makes the printer an access point).

To perform the initial setup for the HP PageWide Pro 452DW printer, you need to follow the 2-step installation protocol.

HP PageWide Pro 452DW Inkjet Printer

Hardware Installation:

  • Unpack the HP carton.
  • Remove the printer carefully and place it close to the wireless router and the computer.
  • Ensure that the printer is placed on a flat surface to ensure seamless printing.
  • Peel the protective tapes surrounding the printer body and discard them.
  • Unpack the power cord from the sealed packaging.
  • Connect the power cord to the primary power source and to the rear end of the printer.
  • Press and release the Power button located at the bottom-left corner of the printer.
  • Wait for the printer to turn on.
  • Select the language and follow the commands on the screen.
  • Open the cartridge door located right below the control panel.
  • Unpack the ink cartridges from the sealed packaging.
  • Place the cartridges carefully into the cartridge slot and ensure that they click in place.
  •  Close the cartridge door.
  • Open Tray 1 located at the side of the printer.
  • Place a paper stack into the paper tray.
  • Make sure to adjust the paper guide according to the edges of the paper and close Tray 1.
  • Open Tray 2 that is present at the front of the printer.
  • Move the paper guides present inside to place the paper stack.
  • Place the paper stack in the paper tray and bring back the paper guides according to the edges of the stack.
  • Close Tray 2.

The hardware installation for the HP PageWide Pro 452DW printer is complete.

Software Installation:

Download the driver:

You might be using either Windows or Mac as your operating system. You need to select the preferred OS correctly to obtain the driver for that particular operating system.

  • Open the HP support page for the PageWide Pro printer.
  • Click the Software, Drivers and Firmware tab.
  • Select Choose a different OS and select your Operating System (Windows or Mac) and the version from the drop-down lists.
  • Click and expand the link for Driver-Product Installation Software (2).
  • Click the Download Button for HP PageWide Pro 452dw Printer series PCL6 Full Software Solution.

Driver Install:

Once the driver is downloaded, you can proceed with the installation process.

  • Perform a double-click on the downloaded software to start the installation.
  • Follow the commands on the screen.
  • Choose the language of your choice and agree to the terms & conditions.
  • Once the printer's driver installation is complete, you will be ready to use the printer directly from your computer.

If you still cannot install HP PageWide Pro 452DW Inkjet Printer, reach out to us for expert assistance.